Last Updated on July 21, 2020 by Forest Master In order to rotate the blades on any of our chippers, you much use a hex socket (6 sided) with no […]
FAQs
FMSS Smart Splitter – Remove Lower Nut
Last Updated on April 14, 2020 by Forest Master Place the nut into a vice and use a big lever between the axe head and tube. If this process doesn’t […]
Pull cord is tight
Last Updated on April 14, 2020 by Forest Master If the pull cord is tight at all, do not keep pulling or you risk damaging the pull cord. Remove the […]
Can I use my wood chipper on angled terrain?
Last Updated on April 14, 2020 by Forest Master We recommend that you maintain the oil of the chipper so that it is flowing out of the plastic dipstick hole, […]
Log Splitter is producing a Gentle Humming Noise (Not Operation)
Last Updated on April 14, 2020 by Forest Master A humming noise will result in the log splitter blowing a fuse and typically means that the motor is tight. First, […]
Push Rod (which operates via the black lever) has become stuck
Last Updated on April 9, 2020 by Forest Master The valve (push rod) may just require cleaning. First, ensure that the ram is fully back to it’s starting point. Then […]
How do I replace the Motor and Pump on my Log Splitter?
Last Updated on July 21, 2020 by Forest Master First, close the bleed screw and turn the machine upside down. You will then see 3 vertical bolts at the rear […]
How should I store my log splitter when not in use?
Last Updated on April 9, 2020 by Forest Master We strongly recommend wrapping the motor in a towel if it is stored unused for a long period of time and […]
