How do I replace the Motor and Pump on my Log Splitter?

Last Updated on July 21, 2020 by Forest Master

First, close the bleed screw and turn the machine upside down.

You will then see 3 vertical bolts at the rear which fasted the pump bracket to the underside of the end cover, and a horizontal bolt at the top of the motor end cover.

Remove these 4 bolts and the complete assembly lifts clear.

There are two O-Rings in the top of the pump bracket, these can be reused.

You can purchase a new motor and pump assembly using this link : https://forest-master.com/product/2200w-motor-and-pump-assembly/