Motor and Pump Assembly for Electric Log Splitters
A replacement motor with pump assembly for electric log splitters.
The 2200 watt unit fits our FM5, FM8 & FM10, 5, 6 & 7-ton log splitters.
A complete electric motor and pump assembly for electric log splitters. 2200 watt 3hp with a standard UK 3-pin plug, which is suitable for the FM5, FM8 and FM10 series of log splitters. Will fit other makes and models. The motor has a push button start that must be held down and is weather protected to IP54 standard, water splashes. Attached by 3 bolts from the pump to the underside of the log splitter and one horizontal bolt at the back of the motor.
The 2300w unit fits our FM16 8-ton log splitter.
Please use the drop-down box above to select the correct one for your needs.
Compatibility with other splitters?
The motor and pump assembly is compatible with the majority of competitor log splitters.
Check out the list below to see if your model has been listed:
- Sealey LS520H
- Sealey LS370H
- Scheppach HL760LS
- Scheppach HL760L
- AL-KO LSH 370/4
- Mitox 66 LSH
- Mitox 41 LSH
- TITAN 41 LSH
- WEN 56208
- WEN 56207
- HANDY THLS-6G
- TITAN TTB762 LSP
- Titan Pro 7 TON
- Lawnflite LS72300EH
- FOX 4 Ton
- FOX 5 Ton
- YARDMAX YS0552
- Ryobi ZRRY49701 4
- Clarke 5 Tonne
- Clarke H4-230v
- Yardworks 65558
- Pow’ R’ Kraft 65556
- Log Dog 7T
- Hyundai
- Bilt Hard
As the motors are a universal replacement to fit many brands of log splitter, the mounting bracket is predrilled with only a pilot hole. It must be drilled out to the correct diameter for the mounting bolt on the machine you are fitting it to. This is typically an 8mm bolt.
