Forest Master Bulk Log Saw Horse 3 (BLS-3H)
The Forest Master Bulk Log Stand 3 (patent GB2520055) is capable of safely securing multiple branches or logs for the user to chainsaw. The logs are held in place by chains that simply drop over the upright log supports and automatically prevent logs from moving during the cutting process.
The bulk log sawhorse 3H is both steadier and capable of holding a much greater amount of logs for you to chainsaw than any competitor on the market.
The main advantage to the design is that when the user is cutting the logs, there is nothing directly below that can be caught by the chainsaw, reducing the risk of injury to the user and damage to the chainsaw or sawhorse.
The BLS3 is supplied with 3 sets of log supports and two pre-drilled wood bases which provide ultimate stability that allows the user to set the spacing of the log supports to either cut logs and branches into 300mm lengths or 400mm lengths. It can hold a stack of logs up to 520mm high.
You can use the pre-set drilled base as well as the uprights to perform cuts of any required or desired length you need.
The sawhorse arrives in a neat and compact box which can be easily and quickly assembled into the sawhorse ready for chainsawing. The same applies for dismantling, simply take the sawhorse apart in a few short minutes for easy transportation.
Bryn (verified owner) –
Excellent service
Toby L. (verified owner) –
Awesome product, super good value, fast delivery
Tony Williams (verified owner) –
I am very pleased with the log sawhorse. It was simple to put together, it is very sturdy and I envisage years of use from it. I am also very pleased that it is so simple to dismantle and re-erect which makes it extremely space saving when not in use. Very happy that I bought it.
Steve G. (verified owner) –
I cannot believe how easy (and safe) it was to use! I am a complete novice with a chainsaw and in less than 4 hours I cut and stacked just over 2½ cubic meters of 9″ logs. Even if you (like me) will only use it once or twice a year to prepare your winter wood, it is well worth the money!
Norman Flett (verified owner) –
Works well well made
david (verified owner) –
Janet N. (verified owner) –
I hadn’t any previous experience of log cutting so want to make sure I had the right kit. I couldn’t have chosen better. Easy to put together and logs secure while I cut through them with my electric chainsaw. Actually looking forward to getting stuck into a load more logs this weekend.
Royston Whitehurst (verified owner) –
fantastic value for what you get.
Anonymous (verified owner) –
DAVID BRUCE MORRIS (verified owner) –
great service,one small problem one crosspiece was really tight couple of rubs with half-round file was all it needed,otherwise no trouble
David Furniss (verified owner) –
Fantastic next day delivery and great product. However, needed to file a couple of burrs to complete assembly.
Tom M. (verified owner) –
I have not used this yet having only just assembled it. According to the booklet supplied, it is possible to buy another ‘H’ section and chain. I was unable to find this on the website under sawhorse or accessories so I have written to Forest Master to get details. I believe this is a new version so it may be that the appearance on the website is in the pipeline. It looks very sturdy but I plan to use its only on a level surface as a rocking sawhorse when using a chainsaw may get the chain snagged. When it came to assembly, there are two wooden base blocks drilled both sides for 3 or 4 ‘H’ sections. There are 6 upright poles and 3 cross members. I recommend checking the crossmembers holes as two of mine had weld spatter and drilling push-through protruding into the opening for the upright poles. I used a half-round file to remove this. I recommend not putting the tube in a vice as the clearance between the upright pole and the crossmember is very tight and not tolerant of any slightly oval shaping of the crossmember hole. The vertical poles are a very tight fit into the wooden blocks. I made the mistake of using a mallet and a block of wood to knock the assembled ‘H’ sections into the wooden bases. In the process, the black plastic tops to the assembled ‘H’ sections got a bit ‘pancaked’ to the extent that fitting the chain loops over the upright poles was very difficult. I have asked Forest Master for a price to replace the plastic tops. If they cannot supply these, then a craft knife may do the trick. If I had to assemble one of these sawhorses again I would measure the depth of the holes in the base and place a piece of masking tape on the upright as a guide to how much further the upright needs to be pushed / knocked into the base.
Dave (verified owner) –
Easy to use and sped up the processing of my timber store
Mark Humble (verified owner) –
Ordered late one evening and confirmation indicated 2 days, however, it arrived the next day. Excellent service and going to buy an extension.
Robert B. (verified owner) –
Richard (verified owner) –
Its brilliant. It makes cutting several logs at the same time dead easy but I feel it is a bit pricey for what it is. But it does work so definitely recommend.
Sarah M. (verified owner) –
JB B. (verified owner) –
Haven’t put it to use yet but it certainly looks the part.
Steve May (verified owner) –
I recently bought the Bulk log saw horse and have just used it for the first time. I am more than happy with how it performed, allowing me to safely cut logs to size in a safe and controlled manner while using a chainsaw (for the first time) Looks and feels like a great piece of kit. I would have no hesitation in recommending the item.
Gareth –
Wish I’d bought this year’s ago! It’s a far safer, quicker, and easier way to process firewood than cutting on the ground or using a workmate. My back is a lot happier doing my firewood for the season now, and I can process logs far faster which means less time on the saw!