Forest Master – Frequently Asked Questions
Explore a range of frequently asked questions regarding our equipment, as well as general log splitting, gardening and forestry-related questions. Is your question not here? Submit a question by emailing us at info@forest-master.com.
DUO10T Manual Log Splitter
Last Updated on July 16, 2020 by Forest Master
This is a rare occurrence which can be put down to a faulty pin which connects to the hand wheel, meaning the jack attempts to turn itself back.
Contact the dealer on +44 0191 265 5000 or Email Info@forest-master.com to arrange a new replacement pin to be sent out to you.
Last Updated on July 13, 2020 by Forest Master
First, the spring must be loosened from the bottom of the splitter. We’ve previously used heavy duty cable ties to do this. Tie the cable ties together, so that you can pull the cable ties back through the hole at the end of the process.
After loosening off the spring, you can then slide the bottom blade up the splitter, towards the hole at the back of the splitter, designed for tightening the blade.
We recommend tightening the bolts on the blade up fully, and then taking the bolts back half a turn.
You can then pull the spring back using the cable ties and hook the spring back on. This will tighten up the bottom blade and stop the blade moving at an angle.
Can’t find your question? Submit it below.