hydraulic oil, log splitter maintenance

Hydraulic Oil: Log Splitter Maintenance

Reading Time: 5 minutes

Last Updated on March 15, 2022 by Forest Master

If you own a log splitter, you’re probably already conscious of hydraulic oil (unless you own a kinetic log splitter). Understandably, it’s a new area to many people and poses a lot of questions about how to correctly monitor the fluid levels to keep your log splitter running in tip-top shape. Not to worry, we’re going to go through everything you need to know without overwhelming you with technical information. Let’s get started!

This article covers:

What is hydraulic oil?

Hydraulic oil is the channel for transferring power within hydraulic machinery. The ram mechanism on a log splitter requires hydraulic fluid inside to provide the required power to split logs with ease. The fluid is also required for forklifts, aircraft, tractors, cruise ships and just about every other industry.

It’s important that the hydraulic fluid carries the correct properties for the operating conditions. It must be thermally stable, fire-resistant, non-corrosive and carry a constant viscosity as well as being long life.

What kind of hydraulic oil do you use in a log splitter?

Typically, the manufacturer of the log splitter will have a recommended oil available within the user manual. However, you should have an understanding of what you are looking at when buying. Viscosity is an important term to be aware of as it’s used to describe the fluid’s resistance to flow. Higher viscosity means a longer time frame to pass through an orifice. This means it’s thicker and harder to compress whereas a low viscosity indicates a thinner, more fluid oil.

The weather can also play an effect on oil viscosity and makes a low index viscosity thicker until it warms up. The ISO number displayed on hydraulic oil is the viscosity grade. You should choose a thinner option for cold weather and a midrange option for high heat.

What is the best oil for a hydraulic log splitter?

Forest Master Hydraulic Fluid is specially formulated to improve the performance of electric log splitters. Only virgin oils are used in the blending of HYD46+ fluid, this means that it lasts much longer without degrading compared to cheaper oils which are typically blended from recycled oil. The oil is designed to meet the requirements of today’s electric log splitters.

Electric Log splitter Hydraulic Fluid, 1 Litre and 5 Litre bottle, HYD46

When replacing old fluid with our HYD46+, the log splitter will see a performance increase of up to 30%. It meets the essential properties required by electric log splitters.

Specification: Oxidation stability, corrosion protection, thermal stability, demulsification performance, air release performance, low foaming, filterability performance and seal compatibility.

How often should you change hydraulic fluid in a log splitter?

A lot of manufacturers will advise that you should change your fluid after every 50 hours. However, if the fluid used is of high quality this will usually give you around 150 hours of log splitting operation. This largely depends on the type of log and how hard it is to split, but 150 hours is the average benchmark.

If the system is kept clean and the hydraulic oil is clear, then generally the oil is fine to continue using until low.

How to change the hydraulic fluid in your log splitter

As instructed in our manuals; you should replace the hydraulic oil in your log splitter after every 150 hours of use.

First, ensure that all moving parts are entirely stopped and the log splitter is unplugged. You then unscrew the oil drain bolt with the dipstick to remove it.

Make sure you have a 4 litres capacity container handy and then tip the log splitter onto the support leg (opposite end of the motor) to drain the hydraulic oil off.

log splitter diagram, empty hydraulic oil

You can then tip the log splitter onto the motor end and refill with fresh hydraulic oil to the volume given for your model of log splitter.

electric log splitter diagram, filling hydraulic oil

Clean the surface of the dipstick attached to the oil drain bolt and screw it back into the oil tank while keeping the log splitter vertical.

Ensure that the level of the refilled oil is no more than 10mm above the first groove on the dipstick.

To finish; clean the oil drain bolt threads before re-inserting, making sure it is correctly tightened to avoid leakage before placing the log splitter horizontal.

How do you know when you need to top up the hydraulic fluid?

As you may have already discovered, it can be incredibly difficult to read a log splitter dipstick due to how clear the hydraulic fluid is. However, there are a few tricks to learn when you should think about topping up your fluid without even having to open the machine up.

If the fluid level is low, then you’ve probably already experienced a drop in performance. Logs your wood splitter once breezed through like butter to a knife is now whirring and being pushed to its limits. Raise the front of the log splitter (opposite end to the motor) on a block of wood or something similar. This pushed the fluid to the back of the log splitter and you’ll see an immediate boost in performance. This also tells us that the fluid levels are low.

How much hydraulic oil do I need for my log splitter?

The majority of log splitter hydraulic fluid reservoirs will allow between 3.5 to 7 litres, largely depending on the size and power of the log splitter. It’s best to be certain about this and check with the product manufacturer before committing to a purchase.

A full reservoir of high-quality hydraulic fluid will provide around 150 hours of operation.

9 comments

  1. john coombes

    thank you for this very useful info

  2. Paul Granville

    My electric log splitter makes the normal buzzing sound when turned on but the splitter does not move.

    I have changed the hydraulic fluid, today but no change

    It appears to have seized up

    Do you have any suggestions

    Thanks

    Paul Granville

    1. Forest Master

      Hi Paul, Check that the plastic knob of the lever is screwed on fully. If this becomes unscrewed it prevents the lever from being pushed right down, stopping the log splitter from operating. You can view the video on this page: https://forest-master.com/ufaqs/the-motor-is-running-but-the-log-splitter-isnt-operating/

    2. Bit late, but this might help someone else: it sounds very much as though you need to replace the motor capacitor. Make sure that it has the same voltage and capacitance (microFarad uF) rating. You can find them on eBay or Amazon. If that doesnโ€™t help, it may be the centrifugal switch inside the motor housing.

  3. Is it meant to state 3.5 – 7 litres of oil rather than gallons?
    โ€œ The majority of hydraulic fluid reservoirs will allow between 3.5 to 7 gallons largely โ€

    1. Forest Master

      Nice catch, Wayne. Thanks!

  4. I like what you said about the dipstick. My intake seems to be malfunctioning. I’ll have to have the hydraulics tested.

  5. Lonel Tessier

    Bonjour?
    J’ai une fendeuse FBV 10 T รฉlectrique, pour prendre le niveau d’huile il faut ; que le bras soit en position haut ou en bas? . j’ai essayez les deux et le nivaux n’est pas le mรชme ! Merci pour l’รฉclaircissement.
    Cordialement

    1. Forest Master

      Pour vรฉrifier le niveau d’huile hydraulique dans la plupart des fendeuses de bรปches, y compris divers modรจles similaires ร  celui que vous avez mentionnรฉ (en supposant que le FBV 10 T soit une faute de frappe ou un modรจle spรฉcifique sur lequel je n’ai pas d’informations directes), la ligne directrice gรฉnรฉrale est de Vรฉrifiez le niveau d’huile lorsque le vรฉrin ou le bras est en position complรจtement rรฉtractรฉe ou abaissรฉe. Cette pratique standard garantit que tout le fluide hydraulique est de retour dans le rรฉservoir, fournissant une lecture prรฉcise du niveau d’huile sans la pression ou le dรฉplacement qui peuvent se produire lorsque le vรฉrin est รฉtendu.

      Voici une approche plus structurรฉe basรฉe sur des pratiques gรฉnรฉrales :

      Assurez la sรฉcuritรฉ : avant de vรฉrifier l’huile, assurez-vous que la fendeuse de bรปches est รฉteinte et dรฉconnectรฉe de toute source d’alimentation. Ceci afin dโ€™assurer votre sรฉcuritรฉ lors de lโ€™inspection.

      Position du vรฉrinย : placez le vรฉrin ou le bras de la fendeuse de bรปches en position complรจtement rรฉtractรฉe ou abaissรฉe. Cela signifie que la partie mobile du sรฉparateur doit รชtre complรจtement en arriรจre ou en bas dans sa position de dรฉpart, et non รฉtendue.

      Vรฉrifiez le niveau d’huileย : localisez l’indicateur de niveau d’huile sur votre fendeuse de bรปches, qui peut รชtre un voyant, une jauge ou un bouchon de remplissage, selon votre modรจle. Le niveau d’huile doit รชtre vรฉrifiรฉ ร  ce stade. Si vous utilisez une jauge, assurez-vous qu’elle est propre avant de la rรฉinsรฉrer pour le contrรดle afin d’รฉviter toute lecture inexacte en raison de l’huile รฉventuellement tachรฉe sur la jauge.

      Lecture du niveau : Lorsque le vรฉrin est complรจtement rรฉtractรฉ, le liquide hydraulique est entiรจrement dans le rรฉservoir, et c’est ร  ce moment-lร  que vous devriez obtenir une lecture prรฉcise du niveau. S’il y a des รฉcarts entre les lectures avec le vรฉrin haut et bas, la position basse est gรฉnรฉralement celle ร  laquelle vous devez faire confiance pour une รฉvaluation prรฉcise du niveau d’huile.

      Remplissage jusqu’au niveau correctย : Si vous devez ajouter de l’huile hydraulique, assurez-vous d’utiliser le type spรฉcifiรฉ par le fabricant de votre fendeuse de bรปches. Remplissez lentement et vรฉrifiez le niveau frรฉquemment pour รฉviter un remplissage excessif, car trop d’huile peut provoquer des problรจmes de pression dans le systรจme hydraulique.

      Compte tenu de la variabilitรฉ des conceptions de fendeuses de bรปches et des recommandations des fabricants, il est toujours prรฉfรฉrable de consulter le manuel d’utilisation de votre modรจle spรฉcifique pour obtenir les conseils les plus prรฉcis sur les tรขches de maintenance telles que la vรฉrification de l’huile hydraulique. Si vous n’avez pas le manuel ร  portรฉe de main ou s’il ne le prรฉcise pas, les directives ci-dessus doivent servir de bonne pratique gรฉnรฉrale. Cependant, en cas de doute ou si le manuel suggรจre le contraire, suivre les instructions spรฉcifiques du fabricant est toujours la meilleure solution.

Leave a Reply

Your email address will not be published. Required fields are marked *

Free Next Day Delivery*

Free Next Working Day Delivery (Mainland UK*)

Forestry Specialists

#1 UK Based Forestry Company - Specialists in all things forestry.

Direct Technical Support

Lifetime Access to Expert Technical Support with Every Purchase.

100% Secure Checkout

PayPal / MasterCard / Visa

Need help? Request our Expert Technical Support Team

Our UK-based expert technical support team is ready to assist you! Please fill out the form below and we’ll get back to you as soon as possible.